Version: 16.12.2014 - Porsche 2015 911 GT3 Cup Technical Manual

Bodywork
4.17.2
4.17.3
4.17.4
911 GT3 Cup (991)
246
Installation:
NOTE
1. Clean bonding surfaces (1) with cleaning solution.
2. Prime bonding surfaces (1).
3. Apply adhesive on the primer.
4. Do not apply adhesive in areas (A) 50 mm and (B) 30 mm.
5. Apply a triangular bead of adhesive measuring X = approx. 15 mm (4.17.3).
6. Position roof assembly
Screw on and tighten fastening nuts (1) on the ⇒ Tightening torque 10
7.
Nm (7.5 ftlb.) roof assembly at front and rear
MY 2015
Two people are needed in order to insert, position and
secure the roof assembly.
Gap from front roof pillar to roof
Offset from front roof pillar to roof
Gap from rear roof pillar to roof
Offset from rear roof pillar to roof
Gap dimension 5.5 mm -1 mm
Gap dimension 0 mm -1 mm
Gap dimension 5.5 mm -1 mm
Gap dimension 0 mm -1 mm
(4.17.4).

Version: 16.12.2014