I General Set Mode - Icom IC-M802 Instruction Manual

Hf marine transceiver

Hide thumbs Also See for IC-M802:

Table of Contents

I About set mode

Set mode operation is used for programming infre-

quently changed values or conditions of functions.

I General set mode

D D Entering general set mode

q Push [SET] to enter general set mode.

w Rotate [GRP] to select the desired item.

e Rotate [CH] to set the values or conditions for the

selected item.

r Push [SET] again to exit general set mode.

D D General set mode items

Noise blanker level

This item adjusts the noise blanker level to protect a

signal from various pulse-type noises from 1 to 10.

(default: 10)

The set level is effective when the noise blanker is ac-

tivated.

Dimmer

This item sets the LCD back light brightness for dim-

mer selection from 0 (dark) to 10 (bright).

By pushing [F] then [MODE

is selected to provide easy visibility during night time

operation, etc.

(default: 10)

LCD contrast

This item sets the LCD contrast from 1 to 10.

], the set brightness

DIM

SET MODE

NOTE: Some of the set mode items described in this

selection are not available on some transceiver ver-

sions.

G R P I T E M

[SET]

C H S E L

Table of Contents