Converter Board - HP Sprout Maintenance & Service Manual

Converter board

The converter board is located to the left of the system board.
Use the same converter spare part for all display panels; however, you must change jumper settings,
backlight cable, and cable connection on the board based on the display panel manufacturer.
To remove the converter board:
1. Prepare the computer for disassembly (see
2. Remove the rear covers (see
3. Separate the computer from the column (see
4. Remove the system board cover (see
5. Disconnect the two cables from the board (1).
NOTE:
ENWW
Removing the rear covers from the computer on page
Use the backlight cable specific to the display manufacturer.
Preparing to disassemble the computer on page
Separating the computer from the column on page
System board cover on page
26).
47).
Converter board
25).
35).
51