System Board - HP Sprout Maintenance & Service Manual

System board

Description
System board for use in models without Windows 8
System board for use in models with Windows 8 Standard
System board for use in models with Windows 8 Professional
To remove the system board:
1. Prepare the computer for disassembly (see
2. Remove the rear covers (see
3. Remove the hard drive (see
4. Remove the memory modules (see
5. Remove the wireless USB dongle (see
6. Separate the computer from the column (see
7. Remove the system board cover (see
8. Remove the heat sink (see
9. Remove the fan (see
10. Remove the processor (see
11. Remove the WLAN module (see
68 Chapter 4 Removal and Replacement Procedures – Computer
Preparing to disassemble the computer on page
Removing the rear covers from the computer on page
Hard drive on page
Memory on page
Wireless USB dongle on page
Separating the computer from the column on page
System board cover on page
Heat sink on page 60).
Fan assembly on page 63).
Processor on page
WLAN module on page
28).
30).
32).
47).
62).
49).
25).
26).
35).
ENWW