Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
Sprout Pro by HP G2
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as
defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame
Retardants weighing > 25 grams (not including
PCBs or PCAs already listed as a separate item
above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and
toner
Components and waste containing asbestos
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
MB, Webcam, converter board ,power button
board,Pogo board,CR board, USB3.0 borad,
Orion board, Winchester board
All types including standard alkaline and lithium
coin or button style batteries
For example, mercury in lamps, display
backlights, scanner lamps, switches, batteries
Includes background illuminated displays with
gas discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in
product
9
6
0
1
0
0
0
0
0
0
0
0
Page 1
Advertisement
Related Manuals for HP Sprout Pro G2
Summary of Contents for HP Sprout Pro G2
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
- Page 3 25. Please refer to the 3.2.25 Remove AIO system fan. 26. Please refer to the 3.2.26 Remove AIO USB3.0 board. 27. Please refer to the 3.2.27 Remove AIO MV1-1 LVDS cable and MV5 Touch cable from MB. 28. Please refer to the 3.2.28 Remove AIO USB3.0 BKT. 29.
- Page 4 3.2.1 Put the system and Disassembly right/Left back cover. 3.2.2 Remove 4 pcs screws and carefully cable routing when you remove SHIELD_RT 3.2.3 Start to remove 7 cables and Remove MVO20 IO Lan cable first。 3.2.4 Remove MVO18 Power cable 3.2.5 Remove MVO19 Pogo cable EL-MF877-00 Page 4...
- Page 5 3.2.6 Remove MVO16 Remington control cable 。 3.2.7 Remove MVO21 Orion cable。 3.2.8 Remove MVO22 Winchester cable.(Put Latch Open first) 3.2.9 Remove MVO15 HDMI cable. EL-MF877-00 Page 5 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 6 3.2.10 Remove 4 pcs screws from Ribbon - AIO Mount and Remove SSHD (1 pcs screw) 3.2.11 Be careful at Rear bezel lower right when you remove Rear Bezel。 3.2.12 Remove M.2 SSD Module. (1 pcs screw). 3.2.13 Remove SHIELD_MID (3 pcs screws) EL-MF877-00 Page 6 Template Revision B...
- Page 7 3.2.14 Remove MV11 SATA cable .(2 pcs screws) 3.2.15 Remove MV3 and MV8 cable. 3.2.16 Remove Thermal module and remove 9 screws. 3.2.17 Remove MV7 cable. EL-MF877-00 Page 7 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 8 3.2.18 Remove PWR dongle module, MV6 cable and 2 pcs screws. 3.2.19 Remove CR module, MV9 cable and 2 pcs screws. 3.2.20 Remove WLAN card , WLAN cover and 1 pcs screw. 3.2.21 Remove Webcam module , MV4 and MV5 cable and 2 pcs screws. EL-MF877-00 Page 8 Template Revision B...
- Page 9 3.2.22 Remove speaker module, 5 pcs screws from left and release speak cable. 3.2.23 Disassemble speaker and remove 6pcs screws from left and right, and release speak cable 3.2.24 Remove Converter board and 1 pcs screw. Release backlight cable. 3.2.25 Remove System Fan and 3 pcs screws. Release system fan cable. EL-MF877-00 Page 9 Template Revision B...
- Page 10 3.2.26 Remove USB 3.0 card and 2 pcs screws. 3.2.27 Remove MB , 10 pcs screws and release MV1-1 LVDS & MV5 Touch cable. 3.2.28 Remove USB PCB BKT and 3 pcs screws EL-MF877-00 Page 10 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 11 3.2.29 Remove 8 thermal pads 3.2.30 Remove BASE PAN and 17 screws. 3.2.31 TPK assembly finished EL-MF877-00 Page 11 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 12 Column System : EL-MF877-00 Page 12 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 13 3.3.1 Remove PSU cover 3.3.2 Remove FAN DUCT and 1 pcs screw. 3.3.3 Remove AIO-Mount Mesh and 2 screws. 3.3.4 Remove 4 foots on the bottom of column. 3.3.5 Release MVO21 Orion cable and MVO22 Winchester cable EL-MF877-00 Page 13 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 14 3.3.6 Remove AIO mount and 4 screws. 3.3.7 Remove Projector 2 covers. 3.3.8 Remove MVO15 Remington HDMI cable 3.3.9 Remove MVO16 Remington control cable. EL-MF877-00 Page 14 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 15 3.3.10 Remove MVO18 PWR cable . 3.3.11 Remove Rear Cover (bottom's 4 hooks into column's socket) 3.3.12 Remove Projector.and 4 Screws. 3.3.13 Remove PSU module and Release 2 cables. EL-MF877-00 Page 15 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 16 3.3.14 Remove Foot cover. 3.3.15 Remove 3.3.16 Remove I/O cover. 3.3.17 Remove 5 Screws on I/O BKT. EL-MF877-00 Page 16 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 17 3.3.18 Remove LT and RT bottom cover 3.3.19 Remove I/O BKT . 3.3.20 Remove EL-MF877-00 Page 17 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 18 3.3.21 Remove Pogo board ,2 screws and MVO19 Pogo cable. 3.3.22 Remove LT and RT top cover. 3.3.23 Remove SCM REAR Cover. EL-MF877-00 Page 18 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 19 3.3.24 Remove 2 Screws on Ribbon. 3.3.25 Remove 2 Screws on SCM Module. 3.3.26 Remove SCM Cover . 3.3.27 Remove Mirror. EL-MF877-00 Page 19 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 20 Accessory port EL-MF877-00 Page 20 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 21 Remove Mouse/Keyboard Battery/M Remove Touch Pan EL-MF877-00 Page 21 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 22 EL-MF877-00 Page 22 Template Revision B PSG instructions for this template are available at EL-MF877-01...