Antennas - HP Sprout Maintenance & Service Manual

Antennas

The antennas route from the WLAN card to transceivers at the top of the computer (transceivers highlighted
in following image).
To remove the antennas:
1. Prepare the computer for disassembly (see
2. Remove the rear covers (see
3. Separate the computer from the column (see
4. Remove the system board cover (see
5. Peel the transceivers off the frame. The transceivers are secured using strong adhesive.
64 Chapter 4 Removal and Replacement Procedures – Computer
Preparing to disassemble the computer on page
Removing the rear covers from the computer on page
Separating the computer from the column on page
System board cover on page
26).
47).
25).
35).
ENWW