Separating The Computer From The Column - HP Sprout Maintenance & Service Manual

Separating the computer from the column

You must remove the computer from the column before you can service the column. The computer is secured
to the column using four Torx screws. One power cable connects the column to the computer as well.
1. Prepare the computer for disassembly (see
2. Remove the rear covers from the computer (see
on page
3. Remove the two right screws that secure the computer to the column.
80 Chapter 5 Removal and Replacement Procedures – Column
78).
Preparing to disassemble the column on page
Removing the rear covers from the computer
77).
ENWW