Docking Board Bracket - HP Sprout Maintenance & Service Manual

Docking board bracket

The docking board bracket is secured with three Torx screws. Two cables are routed along the bottom of the
bracket.
To remove the docking board bracket:
1. Prepare the computer for disassembly (see
2. Remove the rear covers from the computer (see
on page
3. Separate the computer from the column (see
4. Remove the bottom cover (see
5. Remove the side and top cover (see
6. Remove the inside cover (see
7. Remove the docking board shield (see
8. Remove the docking board (see
9. Remove the three Torx screws that secure the bracket to the column.
ENWW
78).
Bottom cover on page
Inside cover on page
Docking board on page
Preparing to disassemble the column on page
Removing the rear covers from the computer
Separating the computer from the column on page
83).
Side and top cover on page
87).
Docking board shield on page
91).
84).
89).
Docking board bracket
77).
80).
93