System Id Setup Page - HP Sprout Maintenance & Service Manual

To update SMBIOS information in Computer Setup:
1. Turn on or restart the computer.
2. Press Esc
screen.
NOTE:
Esc when the monitor light turns green to access the utility.
3. Press F10
4. Go to Security > System ID's.
5. If necessary, press
6. Edit the fields listed. If the feature byte has data or is not editable, then it was not cleared and cannot be
edited.

System ID Setup Page

Setup Field Name
Product Name
Serial Number
SKU Number
Asset Tag
Feature Byte
Build ID
ENWW
while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the
If you do not press Esc at the appropriate time, you must restart the computer and again press
to enter Computer Setup.
Ctrl+A to initiate edit mode.
Enter the Model name/number or marketing name.
Enter the Serial Number of Unit.
Enter the SKU or Product Number including Localization Code.
Enter the 18-byte identifier assigned to the computer.
Enter the Feature Byte string. The feature byte string is case sensitive.
The label includes spaces after every four characters. You can enter or ignore
these spaces – their only purpose is to help with data entry. There is a character
limitation of 40 bytes per line. When you reach this limit, go to the next line to
continue data entry. BIOS ignores the spaces and lines.
If you make an error during data entry, the data will not validate, and the
computer asks you to correct your data input.
The Build ID of the unit.
Comment Label
Flexbuild
Support
Support
Support
Flexbuild
Flexbuild
System board 71