Converter Board - HP Sprout Pro Maintenance & Service Manual

Converter board

When viewing the back of the computer, the converter board is located to the left of the system board.
To remove the converter board:
1. Prepare the computer for disassembly (see
2. Remove the right rear cover (see
3. Remove the memory cover (see
4. Disconnect the two cables from the board (1).
NOTE:
5. Remove the Torx screw (2) that secures the board to the computer.
38 Chapter 4 Removal and Replacement Procedures
Removing the rear covers from the computer on page
Memory on page
Use the backlight cable specific to the display manufacturer.
Preparing to disassemble the computer on page
29).
23).
24).