Gyro Sensor - FUTABA T10J Manual

Gyro sensor

GYRO SENS
Function
This function is dedicated mixing for switching
the gyro sensitivity and gyro mode (AVCS/
NORMAL) of Futaba airplane use gyros. Up to 3
axes can be set.
●The sensitivity switch can be selected and the
sensitivity of each direction of the switch can be
set. (Switches A to H) If the airplane stalls during
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Activating the function
Gain Channel selection
Switch direction
Gyrotype,
Gain rate
● Select the setting item
with the Jog key.
GYRO SENS
■ Activating the function
① Select the "MIX" item
a n d t h e n s e l e c t t h e
"ON" by pressing the +
key or – key.
● When you do not use a function, set to the
"INH" side.
■ Sensitivity setting channel selection
③ S e l e c t t h e
"CH" i tem an d
t h e n s e l e c t
the sensitivity
setting channel by pressing the + key
or – key.
Range：CH5、CH5/CH7、
CH5/CH8、CH5/CH7/CH8
Default：CH5
100
② Select
from the menu with the
Jog key.
GYRO SENS
（Gyro type）
● When using a Futaba GYA gyro, select gyro type GY. This switches the gyro sensitivity setting
item to mode and sensitivity direct reading display.
＋ －
or
■ Gyro type and sensitivity setting
④ Press the Jog key and select the sensitivity setting
＋ －
screen you want to set and then set "type" (gyro type)
or
and "rate" (gyro sensitivity) of each channel by pressing
the +key or – key.
（"type"）Range：STD,GY Default：STD
（"rate"）Range：0 ～ 100% （STD）, NOR100 ～ 0 ～
● When you want to return the set value to the initial value,
flight, the gyro will lose control of the plane's
attitude. From the standpoint of safety, we
recommend that the OFF (0%) position also be set
using a 3 position switch.
● C H 5 , C H 5 / C H 7 , C H 5 / C H 8 o r C H 5 / C H 7 / C H 8
combinations can be selected as the sensitivity
setting channel.
"GYRO SENS" ③ Open the setting screen by
pressing the Jog key.
● When not using this function,
Sensitivity switch selection
（C u r r e n t s w i t c h o p e r a t i n g
direction）
● S w i t c h e s t o t h e
（Gyro Gain）
■ Sensitivity switch selection
② Select the "SW" item and then select the
switch by pressing the + key or – key.
＋
or
Range：SwA ～ SwH、Default：SwA
AVC100% （GY） Default：50% （STD）, 0% （GY）
press the + key and – key simultaneously.
(ACROBATIC)
select INH.
s e n s i t i v i t y s e t t i n g
screen of each switch
direction when the
Jog key is pressed.
－