Print Test After Your Drivers Have Been Installed, Perform A Print Test - Toshiba B-EX4T1 Series Owner's Manual

2.PRINTER SETUP
2.8 Print Test
After your drivers have been installed, perform a print test.
Performing a print test using the Printer Driver
The printer driver's Properties screen allows you to set the
communication conditions, media size, and other printing conditions
in accordance with your operating environment. For details, refer to
the Help for the Windows Printer Drivers screen.
Example: Stock tab display of the Printer Driver's Properties Screen
Print Method
Sensor
Label Gap
Mode
Issue
Post-print Action
(Cut)
Print Speed
Fine Adjustment
Print Method:
Sensor:
Issue Mode:
Post-print Action: Whether to use the cutter or not is selectable.
Fine Adjustment:
28
B-EX4T
Direct thermal or thermal transfer is selectable.
Media sensor type is selectable.
Batch, strip or cut is selectable.
Adjustment values for the feed amount, cut/strip
position, etc. can be set.
ENGLISH VERSION
2.8 Print test