Transfer Roller; Ccd Move To Home - Konica Minolta magicolor 2490MF Service Manual

Field Service Ver. 1.0 Jul. 2006
9.4.3

TRANSFER ROLLER

• Resets the counter value of the transfer roller.
Function
• Executes the image stabilization sequence.
Use • To reset the transfer roller counter after the transfer roller is replaced.
1. Enter the user service mode and call [3. RESET COUNT] to the screen.
2. Select [TRANSFER ROLLER] and press the Menu Select key.
Setting/ 3. Press the Menu Select key.
procedure 4. Turn OFF the machine's main switch.
5. When the machine's main switch is turned ON, the image stabilization is automatically
executed.
9.5

CCD MOVE TO HOME

Function • Moves the scanner unit to its home position for locking.
Use • When transporting the machine
1. Enter the user service mode.
2. Select [CCD MOVE TO HOME] and press the Menu Select key.
3. The scanner unit moves to the home position when the start key is pressed.
4. Turn OFF the machine's main switch.
5. Open the IR unit. Then, inserting a pin or similar object into the hole at portion [1], lower
the lock lever [2].
Setting/
procedure
NOTE
• After the transportation of the machine, make sure to unlock the scanner unit by
raising the lock lever [2] before turning on the machine's main switch.
[1] [2]
9. User service mode
4139F3C525DA
107