Rx Setting; Memory Rx Mode; No. Of Rings; Reduction Rx - Konica Minolta magicolor 2490MF Service Manual

8. Menu mode
8.7

RX SETTING

8.7.1

MEMORY RX MODE

Function • This function can be used to set whether to allow [ON] memory reception or not [OFF].
In cases when confidential faxes are being received, the received document can be
stored in the memory and printed at a specified time or when memory reception is set to
[OFF]. A password can be set to specify the starting time or ending time of memory
Use
reception, or to cancel the function. The set starting time and ending time are valid every
day until memory reception is turned off.
• The default setting is "OFF".
Setting/
ON: Enable memory RX mode
procedure
"OFF": Disable memory RX mode
8.7.2

NO. of RINGS

Function
• This function can be used to set the number of rings between 1 and 16 until the call is
answered.
Use
• The default setting is "2".
• Depend on soft switch setting of marketing area.
Setting/
1: Once
procedure
7: 7 times
13: 13 times 14: 14 times 15: 15 times 16: 16 times
8.7.3

REDUCTION RX

Function • This function can be used to set whether documents longer than the paper are printed
reduced [ON], split [OFF], or discarded [CUT]. However, when sending a document
more than 24 mm (1 inch) longer than the paper, [CUT] is not available. (In this case, the
Use
document is split.)
• The default setting is "ON".
Setting/ "ON": Reduction print mode
procedure OFF: 100% RX mode
CUT: Cut mode
88
"2": Twice 3: 3 times
8: 8 times 9: 9 times
Field Service Ver. 1.0 Jul. 2006
4: 4 times 5: 5 times
10: 10 times 11: 11 times 12: 12 times
6: 6 times