Field Service Ver. 1.0 Jul. 2006
11.7.3
ADF FEED TEST
• To check the paper feeding in the paper take-up/transport sections in the Automatic
Function
Document Feeder.
Use
• When a document misfeed occurs
1. Load paper into the Automatic Document Feeder.
Setting/
2. Press the Start key to begin testing paper feeding.
procedure
3. Press the Stop key to stop testing paper feeding.
11.7.4
COPY ADF GLASS AREA
Function
• To check for dirt in the scanning section of the Automatic Document Feeder.
Use
• If spots appear in the copies
1. Load A4S or LetterS paper into Tray1.
2. Press the Start key to start the [COPY ADF GLASS AREA] function.
Setting/
3. Two copy samples are fed out.
procedure
4. Check that no spots appear in the copy samples.
5. Press the Stop key to stop the [COPY ADF GLASS AREA] function.
11.7.5
CCD MOVE TO HOME
Function
• Moves the scanner unit to its home position for locking.
Use
• When transporting the machine
1. Enter the user service mode.
2. Select [CCD MOVE TO HOME] and press the Menu Select key.
3. The scanner unit moves to the home position when the start key is pressed.
4. Turn OFF the machine's main switch.
5. Open the IR unit. Then, inserting a pin or similar object into the hole at portion [1], lower
the lock lever [2].
Setting/
procedure
NOTE
• After the transportation of the machine, make sure to unlock the scanner unit by
raising the lock lever [2] before turning on the machine's main switch.
[1]
[2]
11. SERVICE MODE
4139F3C525DA
131