11. SERVICE MODE
11.7 FUNCTION
11.7.1
PAPER FEED TEST
• To check the paper feeding in the paper take-up/transport sections without printing on
Function
the paper.
Use
• When a paper misfeed occurs
1. Select the paper tray.
2. Press the Start key to begin testing paper feeding.
3. Press the Stop key to stop testing paper feeding.
Setting/
procedure
NOTE
• It cannot be operated at the time of warming up.
• Don't count.
11.7.2
PRINT TEST PATTERN
A. PATTERN1
Function
• To print the test pattern for adjusting the image.
Use
• If there is tilt or when registration or zoom ratio adjustments are performed
1. Select the paper tray.
2. Select the [PATTERN1].
3. Press the Start key to print the test pattern.
Setting/
procedure
B. PATTERN2
Function
• To print the test pattern for halftones and gradations.
• When checking density and pitch irregularities
Use
• When checking reproducibility of gradations
1. Select the paper tray.
2. Select the [PATTERN2].
3. Press the Start key to print the test pattern.
Setting/
procedure
130
Field Service Ver. 1.0 Jul. 2006
4139F3C550DA
4139F3C551DA