Field Service Ver. 1.0 Jul. 2006
14.3.4
Misfeed at fusing section
A. Detection timing
Type
The paper does not block the exit sensor (PS7) even after the lapse of a predeter-
mined period of time after the registration roller solenoid (SD2) has been ener-
gized.
Detection of
misfeed at fusing
The exit sensor (PS7) is unblocked within a predetermined period of time after it
section
has been blocked by the paper.
The main motor, polygon motor, and rack motor are energized even after the
lapse of a predetermined period of time after paper information has been created.
Detection of paper
The exit sensor (PS7) is blocked when the power switch is turned ON, a cover is
opened and closed, or a misfeed or malfunction is reset.
left in fusing section
B. Action
Exit sensor (PS7)
Registration roller solenoid (SD2)
Step
1
Initial check items.
Check the IPB connector for proper connection
2
and correct as necessary.
Check the PRCB connector for proper connec-
3
tion and correct as necessary.
4
PS7 sensor check.
5
SD2 operation check.
6
Change OPB.
7
Change PRCB.
Relevant Electrical Parts
Printer control board (PRCB)
Image processing board (IPB)
Action
Description
WIRING DIAGRAM
Control Signal
-
-
-
PRCB PJ6PRCB-3 (ON)
PRCB PJ11PRCB-4 (REM)
-
-
14. Jam display
Location
(Electrical
Component)
-
-
-
C-7
J to K-1
-
-
231