Select Tray - Konica Minolta magicolor 2490MF Service Manual

Field Service Ver. 1.0 Jul. 2006
(1) Attaching footer print
When footer is selected ON, it is printed at the end of printable area. 4 mm line area from
the end of printable area is kept for printing footer. It should be attached on footer area
regardless of image length. If the received image is divided into 2 pages or more, footer is
printed in the specified location of all the recording sheets of paper printed.
Image data area:
The received image data is printed on the area except for 12 mm from recording paper
size. (No printable area: 8 mm (
image printable area of each recording paper size due to setting of footer print.
Paper length
A4S 297 mm
A4 210 mm
LetterS 279 mm
Letter 216 mm
Legal 356 mm
8.7.7

SELECT TRAY

Function • This function can be used to select which paper tray can be used to supply paper when
printing received documents or transmission reports. (A paper tray that cannot be used
for supplying paper can also be specified.)
Use
• This function is only available when an optional paper tray is installed.
• The default setting is "Enable".
Tray1: "Enable"
Setting/ Tray2: "Enable"
procedure
• A non-equipped cassette is not displayed.
When setting value is determined, reception setting of utility menu is indicated.
This setting has effect on RX print and Report print.
/ in) + footer area: 4 mm (
1
3
Footer OFF
Image data area
289 mm
202 mm
271 mm
208 mm
348 mm
Disable
Disable
8. Menu mode
/ in)) The following table is the
1
4
Footer ON
Image data area Footer area
285 mm
198 mm
267 mm
204 mm
344 mm
+4 mm
+4 mm
+4 mm
+4 mm
+4 mm
93