Maintenance; Periodic Check; Maintenance Parts; Replacement Parts - Konica Minolta magicolor 2490MF Service Manual

Field Service Ver. 1.0 Jul. 2006

Maintenance

3.

Periodic check

3.1

Maintenance parts

• To ensure that the machine produces good prints and to extend its service life, it is recommended that
the maintenance jobs described in this schedule be carried out as instructed.
• Replace with reference to the numeric values displayed on the Life Counter.
• Maintenance conditions are based on A4S or 11 x 8
3.1.1

Replacement parts

NOTE
• The following replacement cycles are based on "3.2 Concept of parts life."
See P.9
A. Parts to be replaced by users (CRUs)
Classifica-
No
tion
Toner cartridge
1
(C/M/Y)
Toner cartridge
2
(C/M/Y/Bk)
Processing
section
3 Drum cartridge
*1: Four (Y,M,C,K) toner cartridges are set into a machine destined only for North America.
*2: The toner cartridges (Y,M,C) shipped with the machine will need replacement after
about 1,500 printed pages have been produced.
*3: Printed by 3 pages/job for monochrome and 2 pages/job for color
Qua
Part name
ntity
1
*1
1
*2
Mono-
chrome
1
Color
1
/ S, Standard mode, and Preheat OFF.
2
Replacement cycle
Continuous print
about 1,500 pages
1P/J
Continuous print
about 4,500 pages
1P/J
Standard print
about 18,000 pages
*3
Continuous print about 45,000 pages
about 15,000 pages
1P/J
Continuous print about 11,250 pages
about 7,500 pages
1P/J
3. Periodic check
Ref.
Page
P.13
P.13
P.16
7