Field Service Ver. 1.0 Jul. 2006
[2]
5.3.18
LAN board
[1]
[3]
[1]
[2]
[3]
[3]
[1]
4139F2C661DA
[1]
[2]
4139F2C660DA
[1]
4139F2C672DA
4. Remove three screws [1] and the
NCU board [2]. Then, remove the
protection film [3].
NOTE
• Make sure to reinstall the protection
film.
1. Remove the rear cover.
See P.31
2. Remove the left cover.
See P.31
3. Remove eleven screws [1] and dis-
connect the connector [2]. Then,
remove the image processing board
protective cover [3].
4. Remove four screws [1] and discon-
nect the connector (CN5) [2]. Then,
remove the LAN board [3].
5. Other
45