Field Service Ver. 1.0 Jul. 2006
5.3.22
Paper feed unit
1. Remove the rear cover.
See P.31
2. Remove the right cover.
See P.32
3. Remove the left cover.
See P.31
4. Remove the high voltage unit and shield.
See steps 1 to 2 of the removal procedure for "Tray1 paper pick-up solenoid (SD1)" on
P.66.
5. Remove the Rack Drive Assy.
See steps 1 through 3 of the removal procedure for "Developing motor (M3)" on P.62.
[1]
[1]
[3]
[2]
4139F2C600DA
[1]
4139F2C601DA
6. Remove the ventilation fan motor.
See P.59
7. Remove one screw [1], unlock two
tabs [2] and remove the ventilation
fan duct [3].
8. Lay the main body of the printer on
its back.
9. Remove five screws [1].
5. Other
55