Konica Minolta magicolor 2490MF Service Manual page 111

5. Other
[1]
[2]
72
B. Reinstallation procedure
NOTE
• There are five slots provided in the
coupling gear [1] of the Paper Feed
Clutch. These slots are for adjust-
ing the position of the Feed Roller.
When the torque limiter [2] is rein-
stalled, it is necessary to adjust the
position of the coupling gear [1]
and torque limiter [2] so that any
paper take-up failure can be pre-
vented.
4139fs2513c0
1. Install the paper feed clutch [1].
2. Turn the paper feed clutch [2] in the
direction of the arrow shown on the
left until it is engaged with the sole-
noid and stopped.
[1]
4139F2C605DA
3. If the feed roller [1] tilts in the clock-
wise direction, turn the coupling gear
[1]
of the paper feed clutch in the direc-
tion of A and reassemble the Paper
Feed Clutch.
4139F2C606DA
4. If the feed roller [1] tilts in the coun-
[1]
terclockwise direction, turn the cou-
pling gear of the paper feed clutch in
the direction of B and reassemble
the paper feed clutch.
4139F2C607DA
Field Service Ver. 1.0 Jul. 2006