Mircom QX-5000 Series Installation And Operation Manual page 86

Appendix A: Specifications
Model QAA-5230-70/25 Amplifier with two 70V or 25V, 30 Watt Zones
• 70.7Vrms or 25V constant voltage output
• Two fully supervised Class "A" or "B" speaker zones
• 30 watts per zone
• Freq. Response:
• Harmonic Distortion less than 2.5% at 1 KHz
• Current Consumption:
Model QAA-5230S-70/25 Amplifier with 2 split 70V or 25V, 30 Watt Zones
• 70.7Vrms or 25V constant voltage output
• Four fully supervised Class"B" speaker zones, each pair split from one 30 watt amplifier
• 30 watts per zone
• Freq. response:
• Harmonic Distortion less than 2.5% at 1 KHz
• Current Consumption:
Model QAA-5415-70 Amplifier with four 70V, 15 Watt Zones
• 70.7Vrms constant voltage output
• Four fully supervised Class"B" speaker zones
• 15 watts per zone
• Freq. response:
• Harmonic distortion less than 2.5% at 1 KHz
• Current consumption:
Model QAA-5415-25 Amplifier with four 25V, 15 Watt Zones
• 25Vrms constant voltage output
• Four fully supervised Class"B" speaker zones
• 15 watts per zone
• Freq. response:
• Harmonic distortion less than 2.5% at 1 KHz
• Current consumption:
Model QMP-5100B Paging Microphone
• Mounts in Mircom BB-1000 enclosures
• Full set of indicators & controls
• Sturdy fist-microphone
Model QMP-5101B Paging Microphone
• Mounts in Mircom BB-5008, BB-5014 enclosures
• Full set of indicators & controls
• Sturdy fist-microphone
80
ULI bandwidth from 800 to 2800 Hz
standby: 55mA
alarm: 350mA, plus 65mA/Watt Speaker Power
ULI bandwidth from 800 to 2800 Hz
standby: 55mA
alarm: 350mA, plus 65mA/Watt Speaker Power
ULI bandwidth from 800 to 2800 Hz
standby: 55mA
alarm: 350mA, plus 75mA/watt speaker power
ULI bandwidth from 800 to 2800 Hz
standby: 55mA
alarm: 350mA, plus 75mA/watt speaker power