System Settings; Changing The Name For An Internal User; Setting Up/Deleting Isdn Phone Numbers (Msn) - Swisscom Top E604 ISDN User Manual

System settings

The abbreviations in brackets after the titles indicate the ISDN service concerned. Some
features may only be used if they have been authorised by the network provider (there
may be an extra charge).

Changing the name for an internal user

By factory default, all internal numbers are given the names Int.11 , Int.12 , etc.,
according to their numbering. You can change these entries to suit your individual
needs.
i
s
Set base
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
Name
~
Save entry
Since names are saved in the base station, another name can be allocated
i
to a terminal when registering to a different base. This makes it possible
to identify which base the terminal is currently connected to.

Setting up/deleting ISDN phone numbers (MSN)

Your ISDN connection offers you two telephone lines (B channels) that you can use at
the same time. You can set up a maximum of ten individual phone numbers (MSNs) on
your base station.
The MultiLine connection provides three call numbers. All further numbers must be
activated.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
W
Select internal number and open submenu,
e .g. Int.11 .
Confirm.
OK
W
Change the name and open the submenu.
Confirm. The name is now shown in the internal list,
OK
including when an internal call is made from this
internal number.
System settings
93