Specifying The Number Of Rings Before The Answering Machine Starts; Activating/Deactivating Voice Announcement Of Date And Time - Swisscom Top E604 ISDN User Manual

Setting the answering machine (on Top E604 ISDN)
Specifying the number of rings before the answering machine
starts
You can set when you want the answering machine to activate (after how many rings).
The options are: 1 ring tone, 2 ring tone, ..., 9 ring tone. Instead of a set number of
rings, you can also choose the cost saving setting Automatic 2/4 (factory default). In
this setting the answering machine activates automatically:
after 2 rings if there are new messages;
◆
after 4 rings if there are no new messages.
◆
When operating remotely (page 70) by the third ring you will know that there are no
new messages (otherwise the answering machine would have already activated). There
will be no call charges if you hang up now.
Precondition: You have selected an answering machine (page 61).
s
Settings
s
No. of rings
s
Automatic 2/4
j

Activating/deactivating voice announcement of date and time

You can have the recording date and time (time stamp) announced when each
message/memo is played back (activated when supplied).
Precondition: You have selected an answering machine (page 61).
s
Settings
Message/Memo
s
Time stamp
j
76
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the number of rings or Automatic 2/4 and
OK
‰
confirm ( = set).
Hold down (back to idle status).
Select the menu item and confirm.
OK
Confirm.
OK
Select the menu item and confirm (
OK
Hold down (back to idle status).
‰
= activated).