Pre-Assigning The Call Diversion Destination - Cd (Call Deflection); Setting Up Automatic Call Diversion When Not Reaching A Terminal - Swisscom Top E604 ISDN User Manual

Pre-assigning the call diversion destination – CD (Call Deflection)
The call diversion destination for incoming calls is pre-set here. This destination number
is offered as a preset for manual forwarding (page 30).
i
s
Set base
s
Settings
~
OK
s
ISDN settings
s
Forward. dest.
~
Save entry
j

Setting up automatic call diversion when not reaching a terminal

If your handset is out of the radio range of the base station, the battery is flat, or the
handset has been deactivated, a call will be forwarded an external phone numbers you
specify.
Preconditions:
You have exclusively assigned the handset its own receive MSN (page 95). This
◆
MSN must not be assigned as the receive MSN for any other device, not even the
ISDN bus!
Call diversion can only be set up for one incoming MSN on the base station.
◆
By factory default, automatic call diversion is not set up.
i
s
Set base
s
Settings
~
OK
s
ISDN settings
s
Auto.forwarding
s
~
Save entry
j
The line set up for automatic call diversion is marked in the list of set-up call diversion
lines.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
W
Enter destination number and open the submenu.
Confirm.
OK
Hold down (back to idle status).
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
W
Select MSN and open submenu, e.g. MSN1: Anna.
W
Enter destination number and open the submenu.
Confirm. Automatic call diversion is activated
OK
‰
( = on).
Hold down (back to idle status).
System settings
103