Setting Up Rejecting For The Entire Msn Group; Diverting Calls - Swisscom Top E604 ISDN User Manual

System settings

Setting up rejecting for the entire MSN group

You can reject an external call not only on your base station, but for all members of an
MSN group. Pressing
The entire group will no longer be called. A waiting call can also be rejected during a
call. The call is added to the caller list.
By factory default, the function is not activated.
i
s
Set base
s
Settings
~
OK
s
ISDN settings
s
Reject all
j

Diverting calls

i
To make this function easier to use, you can also set one of the function
keys accordingly (page 114).
Diverting internal calls
Only one forward destination can be selected for internal call
◆
diversion.
i
Only one-level call diversion is supported: If the subscriber to whom
◆
you divert your calls has activated their own call diversion, this is no
longer effective. The forwarded call will ring at the party you diverted
it to.
By factory default, internal call diversion is deactivated.
Setting up the forward destination
i
s
Set base
s
Forward. base
~
OK
s
Forward. dest.
s
Int.11
98
will give the caller a busy signal instead of a ringing tone.
REJECT
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Hold down (back to idle status).
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select internal number, e .g. Int.11 .
‰
( = activated).
‰
= activated).