Setting Up The List Of Send Msns For The Next Call - Swisscom Top E604 ISDN User Manual

System settings
Assigning a send MSN
When the phone is supplied no send MSN has been entered. The telephone exchange
adds the send MSN.
You can define one send MSN per internal user. This MSN is shown to the person you
call and the call is also charged to this MSN.
i
s
Set base
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
W
s
Send MSN
s
j

Setting up the list of send MSNs for the next call

You can set up your base station so that after lifting the receiver or pressing the
handsfree key d a list of all available send MSNs is displayed.
By factory default, MSN next call is not activated.
i
s
Set base
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
s
MSN next call
j
96
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select internal number, e .g. Int.11 .
Press the display key to open the submenu.
Select the menu item and confirm.
OK
Select MSN and confirm, e.g. MSN1: Anna
OK
(‰ = set).
Hold down (back to idle status).
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select the menu item and confirm. The list of
OK
entered internal numbers is displayed.
W
Select internal number of the terminal and open the
submenu, e .g. Int.11 .
Select the menu item and confirm (
OK
Hold down (back to idle status).
‰
= activated).