Setting Up An Internal Group Call Group - Swisscom Top E604 ISDN User Manual

System settings

Setting up an internal group call group

You can make a group call from any telephone registered on the base station to all other
registered internal users (page 21).
By default, all registered users with the device type Telephone or Neutral are set up in
the group call group.
i
s
Set base
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
s
Hunt group
j
104
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Confirm.
OK
W
Select internal number and open submenu,
e .g. Int.11 .
Select the menu item and confirm (
OK
Hold down (back to idle status).
‰
= activated).