Text Messages To A Pabx - Swisscom Top E604 ISDN User Manual

SMS (text messages)
W
s
Copy to dir.
s ~
W
Store
j
i
The phone number must be stored in the Phonebook together with its
area code (prefix) so that it can also be used for sending text messages.
Adding a text message sender's telephone number to the Phonebook
Precondition: You have opened the incoming message list and selected a message
(page 53).
W
s
Copy to dir.
s ~
W
Store
j
i
You can create a special Phonebook for SMS within your main Phonebook
by putting an star (*) before the names.
Text messages
You can only receive a text message when the Calling Line Identification is
forwarded to the extension of the PABX (CLIP).
The CLIP of the phone number of the SMS centre is evaluated in your telephone.
If your phone is connected to a PABX, you may have to prefix the number of the SMS
centre with an access code (this depends on your PABX). You can store the access code
on your base station (page 122).
If in doubt, you can test your PABX by sending a text message e.g. to your own number
and putting the access code before the number of the SMS centre. If you do not receive
the message, send another one, this time without the access code.
When you send messages, your sender number may be sent without your extension
number. The recipient cannot reply to you directly in this case.
58
Press display key to open menu.
Select the menu item and confirm.
OK
Go to the Name line and enter the name
(max. 16-digits) (for entering text, see page 130).
Press display key to open menu.
Confirm. The entry is stored.
OK
Hold down (back to idle status).
Press display key to open menu.
Select the menu item and confirm.
OK
Go to the Name line and enter the name
(max. 16-digits) (for entering text, see page 130).
Press display key to open menu.
Confirm. The entry is stored.
OK
Hold down (back to idle status).
to a PABX