Setting Up A Busy Signal When The Msn Is Being Used (Busy On Busy); Assigning An Msn A Ringer Melody - Swisscom Top E604 ISDN User Manual

Setting up a busy signal when the MSN is being used (Busy on Busy)

This setting allows callers to get a busy signal immediately when an external call is
already being made on this MSN, independent of the setting Call waiting.
By factory default, the function is not set.
i
s
Set base
s
Settings
~
OK
s
ISDN settings
s
Busy on busy
j

Assigning an MSN a ringer melody

Each receive MSN is assigned a ringer melody when setting up. You can change this
assignment for each receive MSN individually. This means that all terminals will use this
ringer melody to indicate an incoming call to a receive MSN.
i
s
Set base
s
Settings
~
OK
s
ISDN settings
Set up MSN
s
s
Ringer melody
u v
j
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select and confirm (
OK
Hold down (back to idle status).
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Confirm.
OK
W
Select MSN and open submenu, e.g. MSN1: Anna.
Select the menu item and confirm.
OK
Select melody and confirm, e.g. Ringer Melody: 5.
Hold down (back to idle status).
System settings
‰
= activated).
97