Defining The Send Msn For The Next Call; Callback When The Number Is Busy (Ccbs) - Swisscom Top E604 ISDN User Manual

Defining the send MSN for the next call

Even if you have defined an individual send MSN for the base station (page 96), you can
select another MSN as the send MSN before each call, e.g. for individual recording of
charges.
By factory default, MSN next call is not activated for an MSN.
i
s
Set base
s
Call preparat.
s
MSN next call
s
MSN
j
The temporary send MSN is transferred to the person called as phone
◆
i number information.
To make this function easier to use, you can also set one of the
◆
function keys accordingly (page 115).
You can set up your base station so that after lifting the receiver or pressing the
handsfree key d a list of all available send MSNs is displayed (page 96).

Callback when the number is busy (CCBS)

Precondition: The exchange supports this service.
Callback on busy – CCBS (Completion of calls to busy subscriber)
The user you are calling is currently making a call. Automatic callback saves you making
repeated attempts to dial the number.
Activating callback
The number you are calling is busy or your call is not answered:
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
CALLBCK
Accepting a callback
The base station rings with a special ringer tone and the display shows the callback
number.
c
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the required MSN and confirm
OK
‰
( = activated).
The next call uses this MSN.
Hold down (back to idle status).
Press the display key.
Wait for confirmation from the exchange.
Lift the receiver. The connection is established.
Making calls
25