Setting The Recording Time And Recording Quality - Swisscom Top E604 ISDN User Manual

Setting the recording time and recording quality

You can set the maximum length of a message and its recording quality. The recording
quality determines the total recording time of your answering machine.
On the High quality setting the total recording time is up to 12 min, on Long
recording (standard quality, generally adequate) up to 25 min. The Long recording
recording quality and the Maximum recording time are set by factory default.
The recording of a call ends:
after a pause in speaking lasting more than 8 seconds;
◆
i
at the end of a call; the caller terminates the connection;
◆
after the maximum set recording time has elapsed, if the setting
◆
Maximum was used, when the memory is full.
Setting the recording time
You can limit the maximum length of a message to 1 minute, 2 minutes or 3 minutes.
If you set Maximum for the recording time (factory setting) then it is "unlimited" (until
the memory is full).
Precondition: You have selected an answering machine (page 61).
s
Settings
Message/Memo
Message length
s
Maximum
j
When the recording duration is reached, the concluding announcement
i
is played automatically, if recorded. Then the connection is closed down.
There is no limit to the duration of memo recordings.
Setting recording quality
Precondition: You have selected an answering machine (page 61).
s
Settings
s
AM quality
either ...
High quality
or ...
s
Long recording
j
Setting the answering machine (on Top E604 ISDN)
Select the menu item and confirm.
OK
Confirm.
OK
Confirm.
OK
Select the recording time and confirm,
OK
e.g. Maximum (
Hold down (back to idle status).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Set high quality:
‰
Confirm ( = activated).
OK
Set long recording:
Select the menu item and confirm (
OK
Hold down (back to idle status).
‰
= activated).
‰
= activated).
77