Adjust Moistening Level - FP postbase Operator's Manual

104
PostBase Mailing System

11.7.2 Adjust moistening level

With the help of the supplied spacer ring, the moistening level can be adapted to the
letters accordingly. Depending on the position of the spacer ring, moistening of the
envelope flaps can be reduced or increased.
Warning! Switch off the PostBase mailing system and all components
connected to it prior to adjusting the moistening level.
PostBase button
Spacer ring
Spacer ring
• Switch off the mailing system.
• Remove sealant tank out of the housing
(for further information see chapter 11.7.1
on page 101).
At the rear of feeder:
• Carefully pull out to the back the sealant
tray (see page 106).
Normal moistening
Lug
With this setting, you achieve best results in
most cases.
• Position the spacer ring so that the teeth
are facing down and the lug on the tray is
placed between the guides. The teeth have
to nip into the cut-outs of the tray.
Reduce moistening
Lug
• Position the spacer ring so that the teeth
are facing up and the lug on the tray is
placed between the guides.