Test Print - FP postbase Operator's Manual

4.7

Test print

Using a test print, you can assess the settings for the franking imprint as well as the
print quality.
Test print (example)
According to postal regulations, test prints
are marked as such. Never post test imprints.
Setting a test imprint
The way you set the test print may differ from
the approach described here, depending on
requirements by the respective postal
service. In that case, please refer to the
country-specific addendum to the Operator
Manual.
• Set the desired parameters for the franking
imprint (advert, SMS text etc.).
• Press the P
RODUCT
screen.
• Set the desired product.
Once all necessary mailing data are set, you
can perform a test print. The T
option is shown at the end of the
PRODUCT
additional services list.
• Choose T
EST PRINT PRODUCT
PostBase prompts you to position a letter.
The basics of operation
button in the Home
EST PRINT
.
41