Adjusting Moistening (Postbase One With Sealer) - FP POSTBASE ONE Operator's Manual

94
PostBase One Mailing System

Adjusting moistening (PostBase One with sealer)

11.16
PostBase One monitors the operational conditions of the sealer. Upon system start,
as well as occasionally during operation, sealing liquid from the tank is pumped to the
moistening sponge. Thus, PostBase One makes sure the sponge is always properly
wetted. You only need to adjust the moistening if the envelope flaps are moistened
too little or too much.
Functions and settings of the M
• Open the M
• Choose M
• Use M
ing.
• S
menu and their meaning:
OISTENER
M Increase moistening of envelope flaps.
ORE
S Restore default moistening level.
TANDARD
L Decrease moistening of envelope flaps.
ESS
S P If moistening has been enabled on the
TART UMP
sealer, sealing liquid from the tank will imme-
diately be pumped to the moistener.
.
ENU
.
OISTENER
or L to adjust the moisten-
ORE ESS
the displayed setting.
AVE