Cleaning The Sensors Of The Feeder - FP postbase Operator's Manual

12.6

Cleaning the sensors of the feeder

Over time, paper dust may settle on the feeder's sensors and cause problems with
recognizing positioned letters. We recommend cleaning the sensors in the feeder
once a month to ensure optimal results. You can order a special cleaning kit from
Francotyp-Postalia.
Sensors
• Switch off the PostBase mailing system.
• Release roller transport by pressing on
release key.
Roller transport moves upward.
• Apply cleaning solution to the cleaning
cloth.
• Clean the sensors by wiping them
repeatedly with the cleaning cloth.
• Press roller transport powerfully down until
it clicks into place.
Tips for troubleshooting
129