FP postbase Operator's Manual page 18

18
PostBase Mailing System
Catch tray: attaching the stop
• Attach the stop to the catch tray:
Mounting the weighing platform
• Hold the weighing platform such that the
• Place the weighing platform onto the scale
Slot, long
• Press down slightly on the weighing
Mounting catch tray and feeding device
• Place the respective attachment next to the
• Slightly lift the franking machine on the side
• Push the respective attachment under-
• Put the franking machine carefully down.
Slide the stop into the guides on the catch
tray bottom.
long slot in the weighing platform foot
points to the front.
receptacle from above. The long slot of the
weighing platform must slide in the
counterpart on the scale receptacle.
platform with your flat hand.
franking machine (see overviews on previ-
ous page).
on which you wish to mount the attach-
ment. The bottom side of the housing fea-
tures slots where the attachments are
fastened.
neath the franking machine such that the
catches on the attachment engage in the
slots.