Cleaning / Changing The Moistening Sponge - FP postbase Operator's Manual

11.7.3 Cleaning / changing the moistening sponge

The sponge for moistening the envelope flaps should be cleaned regularly (e.g. al-
ways after weekend). Check the condition of the sponge and replace it if exhausted.
We recommend always keeping a new sponge in reserve.
Warning! Switch off the PostBase mailing system and all components
connected to it prior removing the sealant tank and changing the sponge.
Warning! Be extremely careful when handling liquids. If you fill the sealant
tank, make sure not to wetten any parts connected to the mains. If this should
happen, immediately pull the power plugs. Have the PostBase mailing
system checked by the Customer Support before using it again.
PostBase button
• Insert the sealant tray into the housing until
it clicks into place (see page 107).
• Insert sealant tank into the housing with the
cover downward. Close the flap (see
page 103).
• Switch off the mailing system.
• Open the flap by pressing the release
button.
Maintenance and care
105