FP postbase Operator's Manual page 123

Issue
...
during installation
Blank display
Delivery is incomplete /
damaged
Error during installation
procedure
Other errors ...
Possible cause and remedy
Check whether the power cable is plugged in correctly
and the PostBase is turned on.
Do not start operating the PostBase.
Call the Customer Support.
An error message with troubleshooting information
appears.
If necessary:
• Turn off the PostBase (see chapter 4.1).
Wait one minute.
• Turn the PostBase on again.
The installation procedure restarts.
Make sure that the Connection Configuration is set
correctly (see chapter 10.9).
If you cannot remedy an error yourself, please call the
Customer Support.
Tips for troubleshooting
123