CHAPTER 3 MECHANICAL SYSTEMS
2.3 Removing the Feeding Belt from the Lower Feeding As-
sembly
1) Open the front cover, and detach the
right front cover 2, upper cover, and
rear cover. (See 1.2 through 1.4.)
2) Remove the upper feeding assembly.
(See 2.2.)
3) Remove the 2 screws [1 and 2] and re-
move the stay [3] from the feeding as-
sembly; likewise, remove the 2 screws
[4 and 5], and remove the stay [6] from
the feeding assembly on the opposite
side.
3-8
COPYRIGHT© 2002 CANON INC.
F03-203-01
F03-203-02
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002