Removing The Buffer Feeding Motor - Canon K1 Service Manual

3
Parts Replacement and Cleaning Procedure > Removing the Buffer Pass > Removing the Buffer Feeding Motor

Removing the Buffer Feeding Motor

Preparation
1) Remove the Buffer Pass Unit from the host machine.
Procedure
1) Disconnect the 8 connectors [1], and free the harness from the Wire Saddle [2].
2) Remove the Grounding Spring [1], and remove the Decurler Motor 1 Unit [2].
• 5 Screws (Binding) [3]
[1]
3 Parts Replacement and Cleaning Procedure > Removing the Buffer Pass > Removing the Buffer Feeding Motor
[1] [2]
x8
F-3-21
[3] [2]
x5
[3]
[3]
F-3-22
3) Remove the gear.
4) Remove the Drive Belt Retainer [1], Drive Belt [2], and Pressure Spring [3].
• 1 Screw (Binding) [4]
3-8
F-3-23
[3]
[1]
[2] [4]
F-3-24
3-8