CHAPTER 3 MECHANICAL SYSTEMS
4.3 Removing the Vertical Feeding Roller Rubber
1) Remove the 4 screws [1], and detach the
unit.
2) Remove the E-ring and the bushing [2].
3) Remove the E-ring, gear and bushing
[3]; then, remove the E-ring, gear, pin,
E-ring, and bushing [4]. Finally, detach
the roller unit [5].
4) Remove the roller rubber [1] from each
of the 3 rollers.
3-22
COPYRIGHT© 2002 CANON INC.
F03-403-01
F03-403-02
F03-403-03
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002