Canon Booklet Trimmer-A1 Service Manual page 33

1.1.3 Booklet Press (trim mode only)
The booklet is stopped at the cutting position and is held in place for a specific period of
time after the feeding sensor PS102 goes ON (by the work of the press plate mounted to the
press assembly), thereby eliminating any discrepancy in trimming of paper within booklets.
After finishing pressing, the stopper will return to the standby position.
The booklet is locked in place by the pressing plate until cutting ends in the cutting sec-
tion.
[1] Pressing plate
[2] Stopper
Through Mode (Trim OFF)
The booklet pressing will not take place since trimming is not selected.
REF.
COPYRIGHT© 2002 CANON INC.
[2]
F02-101-03
2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
CHAPTER 2 BASIC OPERATIONS
[1]
[3]
[3] Feeding sensor (PS102)
[4] Booklet
[4]
2-3