1.4 Basic Operation
1.4.1 Trimmer Control Panel (in service mode)
To return to standby state, press 'Menu'.
Service mode
return key
1.5 Others
1.5.1 Backing Up Data
The following items are backed up by the trimmer control PCB:
•
operation mode
•
trim counter
•
trim width adjustment value (trim width factory adjustment value)
•
selected language
•
trimmer ON/OFF
If a discrepancy occurs in the contents of the back-up, the settings will re-
turn to the following (default):
REF.
• operation mode: system
• trim counter: 0
• trim width adjustment value: 0 (each size; each adjustment value)
• selected language: Japanese
• Trimmer: ON
While on a service visit, do NOT change the setting of the DIP switch
(DSW3) on the trimmer controller PCB.
COPYRIGHT© 2002 CANON INC.
LCD panel
Menu
Switch-over keys
F00-104-01
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
Trim
Enter
Error
OK key
SERVICE MODE
S-3