CHAPTER 3 MECHANICAL SYSTEMS
3) Turn the gear [1] on the right side of the
pusher motor to match the positions of
the screw [2] and the screw hole [3];
then, remove the screw through the
screw hole.
4) Remove the 4 screws [1], and discon-
nect the 2 connectors [2]; then, detach
the pusher motor.
5) Remove the 4 claws [1], and detach the
pusher sensor [2].
3-20
COPYRIGHT© 2002 CANON INC.
F03-402-02
F03-402-03
F03-402-04
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002