Removing The Feed Sensor (Ps102), Stopper Hp Sensor (Ps103), And Stopper Release Hp Sensor (Sp104); Removing The Lower Press Assembly Feeding Belt - Canon Booklet Trimmer-A1 Service Manual

5.6 Removing the Feed Sensor (PS102), Stopper HP Sensor
(PS103), and Stopper Release HP Sensor (SP104)
1) As shown in 5.3, remove the lower
press assembly.
2) Remove the feed sensor (PS102) [1].
3) Remove the stopper HP sensor (PS103)
[2].
4) Remove the stopper release HP sensor
(PS104) [3].

5.7 Removing the Lower Press Assembly Feeding Belt

1) As shown in 5.3, remove the lower
press assembly.
2) Remove the E-ring and the 4 bushings
[1]; then, remove the 2 shafts [2], and
detach the 2 belts [3].
COPYRIGHT© 2002 CANON INC. 2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
CHAPTER 3 MECHANICAL SYSTEMS
F03-506-01
F03-507-01
3-31