Removing The Stacker Cover Sensor (Ps114) And The Stacker Cover Switch (Ms3, Ms4) - Canon Booklet Trimmer-A1 Service Manual

4.4 Removing the Stacker Cover Sensor (PS114) and the
Stacker Cover Switch (MS3, MS4)
1) Open the stacker cover, and remove the
6 screws [1]; then, detach the cover [2].
2) Remove the 2 screws [1], and discon-
nect the 2 connectors [2]; then, detach
the sensor unit [3].
When mounting the unit, be
sure the actuator [4] is shifted
up.
COPYRIGHT© 2002 CANON INC. 2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
CHAPTER 3 MECHANICAL SYSTEMS
F03-404-01
F03-404-02
3-23