Removing The Sensors At The Lower Feeding Assembly: Waste Bin Full Sensor (Ps109), And Inlet Sensor (Ps101) - Canon Booklet Trimmer-A1 Service Manual

CHAPTER 3 MECHANICAL SYSTEMS
7) Remove the E-ring and the bushing [1]
(2 pc. each), and detach the 2 pieces of
the feeding belt A [2] and the 2 pieces
of the feeding belt B [3].
2.4 Removing the sensors at the Lower Feeding Assembly:
Waste Bin Full Sensor (PS109), and Inlet Sensor (PS101)
1) Open the front cover, and detach the
right front cover 2 and the upper cover.
(See 1.2 and 1.4.)
2) Perform steps 2) through 4) under 2.3
"Removing the Feeding Belt from the
Lower Feeding Assembly."
3) Using the shaft [1] for support, raise the
lower feeding assembly [2] as shown.
3-10
COPYRIGHT© 2002 CANON INC.
F03-203-06
F03-204-01
2000 CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002