CHAPTER 3 MECHANICAL SYSTEMS
6.3 Removing the Feeding Motor (M101)
1) As shown in 1.3, remove the rear cover.
2) Remove the 4 screws [1], disconnect the
connector [2], and remove the support
[3]; then, detach the feeding motor
(M101) [4].
6.4 Removing the Waste Paper Bin Sensor (PS107)
1) As shown in 1.3, remove the rear cover.
2) Remove the 2 screws [1], take out the
plate [2], disconnect the connector [3],
and free the claw; then, detach the waste
bin sensor [4].
3-40
COPYRIGHT© 2002 CANON INC.
F03-603-01
F03-604-01
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002